Find a depot

Propping & Jacking

Propping

Temporary propping is used extensively in almost any type of construction project from basement construction to bridging. Propping is necessary to support loads during construction, and we provide an impressive range of solutions for hire for a variety of construction settings, from simple adjustable height props to extreme capacity propping systems.

Propping
Mat 125 supporting a bridge in an emergency allowing traffic to flow above
MU Tower propping and supporting bridge piers
Mass 50 supporting the wall of an old building while refurbishment and strengthening of the building happens
Propping
Mat 125 supporting a bridge in an emergency allowing traffic to flow above
MU Tower propping and supporting bridge piers
Mass 50 supporting the wall of an old building while refurbishment and strengthening of the building happens

Applications

Façade Retention
Propping and Shoring
Modular Towers

Our Temporary Propping Systems

With the largest range of temporary propping systems for hire, we can provide integral structural support for any project from low to extremely high load capacity. Our propping systems range from 100kN to 8000kN load capacities.

*
*

Use our allowable load capacity comparison chart below to ensure you find the right Mabey Hire propping system for your project:

*
*

Temporary Propping Design

With many complex factors to consider, temporary propping can require a specialised design; especially for large-scale projects. Temporary propping design considers the important role of load capacities, propping strength, wind resistance and other key factors.

Our experts formulate a temporary propping design, calculating your project's load support requirements, assessing support points and other needs. We engineer a propping design that considers the project's full scope, fitting in with plans and timings to ensure the construction runs smoothly.

Emergency Propping

We know that these projects are not always planned, so our emergency response team are on hand 24/7 to respond to critical situations with emergency propping equipment. See our team in action below, using our Mass 50 system to re-open the M6 just 24 hours after a bridge strike closed it in both directions.

*

Resources

View or download here

Our Propping solutions

Our wide range of temporary propping systems are available to hire or as part of a tailored propping design. You'll find propping equipment for low to extremely high load capacity requirements. Discover the right solution for your project.

*
Adjustable Props
Adjustable Props
*
Kwikstage
Kwikstage
*
Titan Prop
Titan Prop
*
System 160
System 160
*
Mass 10
Mass 10
*
Mass 25
Mass 25
*
Mass 50
Mass 50
*
Mat 125
Mat 125
*
Superprop
Superprop
*
MU Towers
MU Towers

Get in touch with us

Give us a call

For all project specific design and technical enquiries, please contact your local service team

  • {{ title }}

    • Send us an email

    If you want to talk to us about your project, simply send us an email and a brief outline of how we can help and we'll be in touch

    action@mabeyhire.co.uk

    Mersey Gateway

    A new solution was needed to provide relief from congestion on an ageing bridge in Widnes. The high profile and complex project required significant temporary works support and we used our expertise to deliver a bespoke propping and monitoring scheme.

    Find out more

    Atlantic Square, Glasgow

    During development works to a Grade I listed building in the heart of Glasgow’s financial district, we used digital technology and our propping system to protect the original façade of the historic building.

    Find out more

    Union Mill

    When stonework began to crumble from a block of flats in Huddersfield during routine maintenance work, immediate action had to be taken. Our emergency propping made the building safe for repairs.

    Find out more

    Simon Building

    Conversion works at the University of Manchester required the removal of two columns, each supporting five stories above. This meant a versatile propping solution was required to support the installation of new beams.

    Find out more

    M6 Bridge Strike

    When a lorry smashed into one of the main supports beneath a bridge over the M6 in Lancashire, the structural integrity of the bridge was severely compromised. Our emergency response team were called in to provide a propping and jacking solution to quickly support the bridge.

    Find out more

    Mabey Hire solution enables testing of platform to paint Queensferry Bridge

    Temporary support towers and jacking systems support platform to enable painting of 2.7km-long bridge.

    Find out more
    *
    *
    *
    *
    *
    *

    It looks like you are working with our

    So that we can assist you further, could you share a few details and your download will start straight away.